Categories

PrestaShop

RCWL-1601 Ultrasonic Ranging Sensor Module DC 3V-5V Compatible with HC-SR04

3,54 €
Tasse incluse
  • Politiche per la sicurezza (modificale con il modulo "Rassicurazioni cliente") Politiche per la sicurezza (modificale con il modulo "Rassicurazioni cliente")
  • Politiche per le spedizioni (modificale con il modulo Rassicurazioni cliente) Politiche per le spedizioni (modificale con il modulo Rassicurazioni cliente)
  • Politiche per i resi merce (modificale con il modulo Rassicurazioni cliente) Politiche per i resi merce (modificale con il modulo Rassicurazioni cliente)

RCWL-1601 is a 3V-5.5V power supply open ultrasonic ranging module . The software is fully compatible with hC-SR04. It is with lead-free technology. 2cm ultra-small blind area, typical 4.5m most distant, 2.2mA ultra-low working current. It is smaller in size and has better accuracy than hC-SR04 for cotton and irregular body measurements.

Features:
1>. Professional ultrasonic ranging chip.
2>. 3V-5.5V wide voltage power supply.
3>. 2. 2mA working current.
4>. 2cm minimum blind area.
5>. The software is fully compatible with hc-sr04.
6>. Shorter test cycle :50mS (hc-sr04 is 200mS)
7>. 2 cm - 450 cm super wide measuring range (measuring flat walls)
8>. Suitable for measuring cotton and irregular objects.
9>. The size is 1.8cm X 4cm.
10>. No lead process.
11>. Environmental protection probe (certificate of environmental protection)
12>. Working temperature: -10 Celsius to 90 Celsius

Parameters:

No. Parameter Remark Min. value typical value Max. value Unit
1 Working voltage   3   5.5 V
2 Working current     2.2   mA
3 Maximum detection range Dry the whole metope 400 450   CM
4 Working frequency     40   KHz
5 Blind area     2 3 CM
6 Detection accuracy     士 2   %
7 Resolution     1   mm
8 Detection Angle Maximum directional Angle   ±15 ±20 Degree
9 Measurement period     50   mS
10 Output interface mode   GPI0  
11 Working temperature Plastic shell probe (to be customized) -10   60
12 Working temperature Aluminum shell probe -10   90


Pin Definition:

No. Pin Description
1 VCC Power supply
2 Trig The GPIO mode is Trig, trigger signal.
3 Echo The GPI0 mode is Echo, feedback signal.
4 Gnd Ground
5 NC NC
6 3V 3V power output


Size:



Differences:
(HC-SR04 & RCWL-1601 & RCWL-1603)

Picture One:


 

Picture Two:

ICS-13164