Categories

Categorie
PrestaShop

Ambient Light Sensor Breakout - APDS-9301

5,98 €
Tasse incluse

The APDS-9301 Ambient Light Sensor Breakout is an I2C-compatible luminosity sensor board that converts light intensity to a digital output signal.

  • Politiche per la sicurezza (modificale con il modulo "Rassicurazioni cliente") Politiche per la sicurezza (modificale con il modulo "Rassicurazioni cliente")
  • Politiche per le spedizioni (modificale con il modulo Rassicurazioni cliente) Politiche per le spedizioni (modificale con il modulo Rassicurazioni cliente)
  • Politiche per i resi merce (modificale con il modulo Rassicurazioni cliente) Politiche per i resi merce (modificale con il modulo Rassicurazioni cliente)

The APDS-9301 Ambient Light Sensor Breakout is an I2C-compatible luminosity sensor board that converts light intensity to a digital output signal. This breakout is fairly simple and has been specifically designed with only a few ancillary passive components in addition to the ADPS-9301 IC itself. All readings are returned to your chosen microprocessor in lux, providing precise Illuminance measurement under diverse lighting conditions.

On top of each board breaking out our standard I2C pin-out of SCL, SDA, 3.3V and GND, we’ve also provided an INT pin so the APDS-9301 can be programmed to generate an interrupt under certain conditions. It is important to note that this breakout is non-instantaneous, so it will require some integration time to take a measurement.

  • Typical Operating Voltage: 3.0V
  • Maximum Operating Voltage: 3.6V
  • 16-Bit Digital Output with I2C Fast-Mode at 400kHz
  • Programmable Analog Gain and Integration Time
  • 50/60-Hz Lighting Ripple Rejection
  • Programmable Interrupt Pin and Function
  • I2C Pull-up Resistors

https://learn.sparkfun.com/tutorials/apds-9301-sensor-hookup guide?_ga=2.62299172.981025724.1518088025-767489989.1458921423

SF-SEN-14350