Categories

Categorie
PrestaShop

DC 12V Mini Digital Temperature Controller Module -9~99 Celsius

7,93 €
7,14 € Risparmia 10%
Tasse incluse

DC 12V Mini Digital Temperature Controller Module -9~99 Celsius w/ NTC Waterproof Sensor Probe

  • Politiche per la sicurezza (modificale con il modulo "Rassicurazioni cliente") Politiche per la sicurezza (modificale con il modulo "Rassicurazioni cliente")
  • Politiche per le spedizioni (modificale con il modulo Rassicurazioni cliente) Politiche per le spedizioni (modificale con il modulo Rassicurazioni cliente)
  • Politiche per i resi merce (modificale con il modulo Rassicurazioni cliente) Politiche per i resi merce (modificale con il modulo Rassicurazioni cliente)

"

1.Parameter:
Parameter Value
Temperature Measurement Range -9~99 Celsius
Control Precision 1 Celsius
Refresh Frequency 0.5s
Operating Temperature -10~60 Celsius
Operating Humidity 20%-85%
Measurement Input NTC Waterproof Sensor
Measurement Precision 1 Celsius
Setting Value -9~99 Celsius
Input Power DC 9-15V
Size 78*51mm
Output Relay Output (220V 10A/12V 10A )
2.Features:
1>. Adopt high-speed MCU, accurate intelligent control
2>. Three vision window display
3>. Simple setting, easy to operate
4>. Wide setting range of -9~99 Celsius
5>. Widely applied to room temperature control, water temperature control, incubators etc
3.Using Method:
Connect the power supply and device, then it can offer power to the controller; and it will display measured temperature in this time, users can set START to STOP according to their needs
The temperature controller output is 10A relay, it can satisfy various high power loads; after connect the circuit, it can supply power for the controller
START Indicator And Digital Tube Introduction
START Indicator: START (red) indicator lamp is on, it means the relay and device starts operating
STOP Indicator: STOP (green) indicator lam is on, it means the relay is disconnected and the device stops operating
Digital Tube: the red digital tube display is measured temperature (left green digital tube is setting start temperature; right green digital  tube is setting stop temperature)
Key:
Start: “??” set start temperature
Stop: “??”set stop temperature
High-Temperature Start- refrigeration mode
When the setting start temperature>stop temperature, detection temperature>=start temperature, the relay will operate, and refrigeration device will operate; when detection temperature <=stop temperature, the relay will be disconnected and the refrigeration device will stop operating. For example, set start temperature is 30 Celsius, stop temperature is 25 Celsius, when the detection temperature is no lower than 30 Celsius, the relay will operate and the START indicator lamp (red) will be on; when the detection temperature is no higher than 25 Celsius, the relay will be disconnected and the STOP indicator lamp (green) will be on
Low Temperature Start-Heating Mode
When the setting start temperature
4. Pin Definition:
Module Size

"

ICS-12455