menu
Categories
- Arduino
- Raspberry Pi
- Educational
-
Robotica Domotica
- Meccanica
- Servomotori
-
Schede
- Accessori
-
Sensori
- Sensori vari
- Sensori ad ultrasuoni
- Sensori di posizione
- Sensori ad infrarossi
- Sensori di temperatura
- Sensori di umidità
- Sensori di luminosità
- Sensori di Gas ed Alcool
- Sensori di contatto
- Sensori di suono
- Sensori di colore
- Sensori Real Time Clock
- Set di sensori
- Sensori di vento
- Sensori magnetici
- Sensori biometrici
- Sensori Wearable
- Laser
- Motori
- Batterie
- Carica batterie
- Attrezzatura
- Prototipazione elettronica
- Pannelli solari
- Idee regalo
- ACCESSORI DA LABORATORIO
- MICRO PLC
- BOX PER PROGETTI ARDUINO/RASPBERRY
- ATLAS SCIENTIFIC - ENVIROMENTAL ROBOTICS
- CNC - Plotter
-
Stampanti 3D
- Officine Robotics
- Scanner 3D
- Fablab - Atelier Creativi
- Robot Kit
- Taglio Laser
- IoT - Smart Home
- Nuove Tecnologie
- blog
- Robotica Domotica
-
- Accessori
- ACCESSORI DA LABORATORIO
- ATLAS SCIENTIFIC - ENVIROMENTAL ROBOTICS
- Attrezzatura
- Batterie
- BOX PER PROGETTI ARDUINO/RASPBERRY
- Carica batterie
- Idee regalo
- Meccanica
- MICRO PLC
- Motori
- Pannelli solari
- Prototipazione elettronica
- Schede
- Sensori
- Laser
- Sensori ad infrarossi
- Sensori ad ultrasuoni
- Sensori biometrici
- Sensori di colore
- Sensori di contatto
- Sensori di Gas ed Alcool
- Sensori di luminosità
- Sensori di posizione
- Sensori di suono
- Sensori di temperatura
- Sensori di umidità
- Sensori di vento
- Sensori magnetici
- Sensori Real Time Clock
- Sensori vari
- Sensori Wearable
- Set di sensori
- Servomotori
- Accessori
Offerte speciali
-
Luglio
Per tutto Luglio 15% off Luglio -
Agosto
Per tutto Agosto 10% off Agosto
Lithium Ion Polymer Battery - 3.7v 500mAh
Lithium Ion Polymer Battery - 3.7v 500mAh
-
Politiche per la sicurezza (modificale con il modulo "Rassicurazioni cliente")
-
Politiche per le spedizioni (modificale con il modulo Rassicurazioni cliente)
-
Politiche per i resi merce (modificale con il modulo Rassicurazioni cliente)
"
Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 500mAh for a total of about 1.9 Wh. If you need a larger (or smaller!) battery, we have a full range of LiPoly batteries
The batteries come pre-attached with a genuine 2-pin JST-PH connector as shown and include the necessary protection circuitry. Because they have a genuine JST connector, not a knock-off, the cable wont snag or get stuck in a matching JST jack, they click in and out smoothly.
The included protection circuitry keeps the battery voltage from going too high (over-charging) or low (over-use) which means that the battery will cut-out when completely dead at 3.0V. It will also protect against output shorts. However, even with this protection it is very important that you only use a LiIon/LiPoly constant-voltage/constant-current charger to recharge them and at a rate of 150mA or less. We suggest our Micro Lipo charger, which has a 100mA default rate. You can also set the Micro Lipo to 500mA rate for a faster charge.
Like most lipos, the batteries we sell do not have thermistors built in. This is why we suggest charging at 1 C or even less - 100 to 500mA is a good rate, and available from any USB port if using a USB-powered charger
Additional safety notes: Do not use a NiMH/NiCad/lead-acid charger! Also, do not abuse these batteries, do not short, bend, crush or puncture. Never charge or use unattended. Always inspect batteries and surrounding circuitry constantly for any damage, loose wiring, or possibility of short circuits. As with all Lithium ion polymer batteries and with any power source - they should be used by experts who are comfortable working with power supplies.
-
Technical Details
Details:
- Weight: 10.5g
- Size: 29mm x 36mm x 4.75mm / 1.15"" x 1.4"" x 0.19""
- Power Lead Length: 80mm / 3""
- Output: 500mAh at 3.7V nominal?
-
Learn
All about the power packs that propel your projects!Fashion headwear for cyberpunks, steampunks and Daft Punks.Light up your drums with sound.Design and 3D Print a custom tree topperMake glowy buttons for apparelTurn a 24x NeoPixel ring into a light for a DSLR camera3D printed NinjaFlex Electronic Fashion3D Print a flexible armband for miniPOV4Fire up that next gig or party fire horns!Make your own Adabot Toy!Sound sensitive NeoPixel capCall phones, send and receive SMSs, & more! All with FONA
"